Home News

How save "starved" batteries

China HONG KONG TAC INDUSTRIAL CO., LTD. certification
China HONG KONG TAC INDUSTRIAL CO., LTD. certification
Customer Reviews
Dear Davide, I leave you in Vivian's hands, I'm sure you will come to an agreement., Vivian is professional in our product.

—— Davide Bet

Here is the signed PI. Thank you , We hope

—— Mr Ander

12V 110Ah battery pack for solar product I like your solar battery pack. Good quality and delivery fast.

—— Eyal Dolev

The battery pack is more atractive for us . May I receive drawing of other pack 12V 20AH with dimentional info ? I need 50pcs to test .

—— Nizamettin

We have received the battery packs and performing tests have passed . We are impressed by the assembly. it is almost the best one . thank you

—— Alexander Kozhushko

Pictures show a nice battery pack, performance is ok , We need serial connected 4cells (4S1P) configuration with protection circuitry

—— George Komisar

big thanks for your work, we got the cargos last week, it seems nice.

—— Johnny Black

I think it is a good idea to solve the problem, I am really appreciate you would like to help us.

—— Simone Kowalk

yes , we received the batteries and chargers last Friday, Everything looks great,well packed, no damage and dlivered in the time frame as promised.

—— Met vriendelijke groet

Thanks for your input, we have checked each and every think and on our side every thing is great. Just proceed to submit the company documents to get approval.

—— Joey Schumer

I'm Online Chat Now
Company News
How save "starved" batteries
1. Tandem method. An additional 12-volt battery with normal voltage is connected in series with the entire battery pack. For example, if the original car is a 48V-20AH battery, then we will connect another 12V-20AH battery in series. A fully charged 12V battery has a voltage of about 13V. After being connected in series, it can increase the voltage of the entire battery, and then use its original charger to charge it. In this way, the battery can be charged. After plugging in the charger, the charger is a red light, and you can charge the battery at this time. When the charger turns green, remove the other battery connected in series. Then charge it normally.
2. Parallel method. This method is a bit more troublesome. For example, the vehicle used to have a 48V-20AH battery, and we have another set of 48V-20AH batteries in parallel. Everyone knows that the voltage across the parallel circuit is equal, and the high voltage end will flow into the low voltage end. This method is also used by many battery dealers to detect completely dead batteries. Then charging can also achieve the purpose of charging. This principle is similar to having a battery connected in series. It also raises the voltage of the entire group.
3. Low-voltage charging method. Use a small one-size charger for charging. For example, if it is a set of 60V-20AH batteries, then we use a 48V-20AH charger for charging. In most cases like this, it can be charged. The principle is also similar to the first one, the charging voltage is closer to the voltage at both ends of the battery.
4. Single battery charging method. Charging a single battery with a 12-volt motorcycle charger can activate the battery, but this kind of charging is relatively slow. Generally, it takes more than 7 hours to charge the battery before the battery voltage slowly rises to about 12V. It takes a lot of time to charge all single blocks.
Pub Time : 2021-06-18 21:04:27 >> News list
Contact Details

Contact Person: Ms. Alice

Tel: 13928880191

Fax: 852--51230576

Send your inquiry directly to us (0 / 3000)



Factory Address:No.27 BOWANG Street ,Nan Cun Town, Panyu, Guangzhou, GD,China