HONG KONG TAC INDUSTRIAL CO., LTD.

              Your Personal Battery Expert!

      Vivian@tacbattery.com                         Mobile : 18028330146

 

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Company News
Home ProductsPolymer Lithium Ion Batteries

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

    • 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And  Discharge 0.5C
    • 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And  Discharge 0.5C
  • 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And  Discharge 0.5C

    Product Details:

    Place of Origin: guangzhou
    Brand Name: TAC BATTERY
    Certification: ROHS \ CE
    Model Number: 13200MAH 3.7V

    Payment & Shipping Terms:

    Minimum Order Quantity: 5000 pack
    Price: USD 23
    Packaging Details: 20 pack in one plastic tray, 10 tray in each carton
    Delivery Time: 20-30 days for pack
    Supply Ability: 100000 per month
    Contact Now
    Detailed Product Description
    Material: Polymer Lithium Voltage: 3.7v
    Capacity For Pack: 13200mah Capacity For Cell: 4300mah
    Accemble: 4s1p Connector: 5 Pin Molex 51146. //// Cable 150mm Length
    Circle Life: 500 Times Warranty: 1 Year
    Size: Less Than 200mm X 110mm X. 80mm

    4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

    Base information

    item data remark
    1 16000mah standard capacity
    2 15500mah Min  capacity
    3 3.7v  voltage
    4 4.2±0.03V 100% full charge
    5 0.5c  charge current
    6 0.5c  dishcharge current
    7 5 pin molex 51146. connector
    8 peak current 2A
    9 continue current 1.5A

     

    Other specification for 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

    Number

    Item

    General data

    Remark

    1

    Internal Impedance

     

    ≤80mΩ

    The measure must uses the new batteries that within one week after shipment and cycles less than 5 times test by internal resistance measured at AC 1KHZ after 50% charge

     

    2

    Standard charge

     

    Constant Current 0.5C5A

    Constant Voltage 4.2V

    0.01 C5A cut-off

     

    Charge time about  4.0h

     

    3

    Standard discharge

     

    Constant current 0.2 C5A

    end voltage 3.0V

     

     
    4

    Fast charge

    (

    Constant Current 1C5A

    Constant Voltage 4.2V

    0.01 C5A cut-off

     

    Charge time about 2.5h

     

     

     

     

    Initial Performance Test For Cell

    Item

    Test Method and Condition

    Requirements

    Open-Circuit

    Voltage

     

    The open-circuit voltage shall be measured within 24 hours after standard charge.

    ≥4.08V

    Internal impedance

    Internal resistance measured at AC 1KHz after 50% charge.

    ≤80mΩ

    Minimal Rated

    Capacity

     

    The capacity on 0.2C5A discharge till the voltage tapered to 3.0V shall be measured after rested for 30min then finish standard charge.

     

    Discharge Capacity

     

    ≥4000mAh

     

    Mechanical characteristics and Safety Test witl UN38.3 Standard

    1 / Vibration Test :

    After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz an 55Hz, the excursion of the vibration is 1.6mm. The cell shall be vibrated for 30 minutes per axis of XYZ axes.

    pass standard: No explosion,No fire

     

    2 / Drop Test

    The cell is to be dropped from a height of 1 meter twice onto concrete ground.

    pass standard: No explosion,No fire

     

    3 / Crush Test

    Fresh,Fully charged

    Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min.

    pass standard: No explosion,No fire

     

    4 / Short Circuit Test (20±2℃ ).

    samples require: Fresh,Fully charged

    Each test sample battery, in turn, is to be short-

    circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at room temperature(20±2℃ ).

    pass standard:  No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃

     

    5 / Short Circuit(60±2℃ ) test

    samples require: Fresh, Fully charged

    Each test sample battery, in turn, is to be short-

    circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at temperature(60±2℃ ).

    pass standard: No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃

     

    6 / Impact test

    samples require: Fresh,Fully charged

    A 56mm diameter bar is inlayed into the bottom of a 10kg weight. And the weight is to be dropped from a height of 1m onto a sample battery and then the bar will be across the center of the sample.

    pass standard:No explosion, No fire

     

    7 / Forced Discharge test

    samples require: Fresh,Fully charged

    Discharge at a current of 1 C5A for 2.5h.

    pass standard:No explosion, No fire

     

    8 / Nail Pricking test

    samples require: Fresh,Fully charged

    Prick through the sample battery with a nail having a diameter of 3mm and remain 2h.

    pass standard:No explosion, No fire

     

    Drawing for 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

    4s Lipo Battery For Table PC 16000Mah 3,7V Charge And  Discharge 0.5C

    T

    Max.08.0

    W

     

    50.5+0.5 –0.5

    H

     

    110+0.5 –0.5

    UNIT

     

    mm

     

         

     

     

     

     

     

     

    Product Photos

    4s Lipo Battery For Table PC 16000Mah 3,7V Charge And  Discharge 0.5C

     

    Contact Details
    HONG KONG TAC INDUSTRIAL CO., LTD.

    Contact Person: Vivian

    Send your inquiry directly to us (0 / 3000)

    Other Products